What sizes of blind flanges are available?

Jul 01, 2025

Leave a message

Hey there! I'm a supplier of blind flanges, and I often get asked about the available sizes of these handy components. So, I thought I'd put together this blog post to give you the lowdown on all the different sizes you can find in the world of blind flanges.

First off, let's quickly go over what a blind flange is. A blind flange is a solid disk used to close the end of a pipe, valve, or other equipment. It's a crucial part in many piping systems as it helps to block the flow of fluid or gas, and it can also be used for inspection or maintenance purposes.

Now, onto the sizes. Blind flanges come in a wide range of sizes to fit different pipe diameters and pressure ratings. The size of a blind flange is typically determined by two main factors: the nominal pipe size (NPS) and the pressure class.

Nominal Pipe Size (NPS)

The NPS is a North American set of standard sizes for pipes. It's not an exact measurement of the pipe's diameter but rather a standardized number that represents the approximate size. Common NPS sizes for blind flanges range from 1/8 inch all the way up to 60 inches.

  • Small Sizes (1/8 - 2 inches): These smaller blind flanges are often used in applications where space is limited or in systems with low flow rates. For example, in some laboratory setups or small-scale plumbing systems, you might find these tiny blind flanges. They're also handy for closing off small ports on equipment.
  • Medium Sizes (3 - 24 inches): This is the most common range of sizes for blind flanges. They're used in a variety of industries, including oil and gas, chemical processing, and water treatment. In oil refineries, medium-sized blind flanges are used to isolate sections of piping during maintenance or to block off unused connections.
  • Large Sizes (26 - 60 inches): Large blind flanges are typically used in high-capacity systems, such as in power plants or large-scale water distribution networks. These massive flanges are designed to handle high pressures and large volumes of fluid. Installing a 60-inch blind flange is no small feat; it requires specialized equipment and experienced workers.

Pressure Class

The pressure class of a blind flange indicates the maximum pressure it can safely withstand. There are several standard pressure classes, including 150, 300, 400, 600, 900, 1500, and 2500.

  • Class 150: This is the lowest pressure class and is suitable for low-pressure applications, such as in residential plumbing or some light industrial systems. It's a cost-effective option for systems that don't require high-pressure resistance.
  • Class 300 - 600: These pressure classes are commonly used in general industrial applications. They can handle moderate to high pressures and are found in many chemical plants, food processing facilities, and oil and gas pipelines.
  • Class 900 - 2500: These high-pressure classes are used in critical applications where safety and reliability are of utmost importance. In offshore oil rigs or high-pressure steam systems, you'll find blind flanges with these pressure classes. They're designed to withstand extreme pressures and are built to strict quality standards.

Special Sizes and Custom Orders

In addition to the standard sizes, we also offer special sizes and custom orders. Sometimes, a project might require a non-standard size of blind flange, or the pressure requirements might be outside the standard range. That's where our custom manufacturing capabilities come in. We can work with you to design and manufacture a blind flange that meets your specific needs. Whether it's an odd-sized flange for a unique piece of equipment or a high-pressure flange with special materials, we've got you covered.

SO FlangeReducing Flange

Related Flange Types

While we're on the topic of flanges, it's worth mentioning a few related types. If you're looking for a flange that can reduce the size of a pipe, you might be interested in Reducing Flange. These flanges are designed to connect pipes of different diameters. Another type is the Socket-welding Flange, which is used for joining pipes by inserting the pipe into the flange and welding it in place. And then there's the So Flange, also known as a slip-on flange, which is easy to install and commonly used in low-pressure applications.

Why Choose Us as Your Blind Flange Supplier

As a blind flange supplier, we take pride in offering high-quality products at competitive prices. Our flanges are made from top-grade materials, such as carbon steel, stainless steel, and alloy steel, to ensure durability and reliability. We have a strict quality control process in place to make sure that every flange we produce meets or exceeds industry standards.

We also have a team of experienced professionals who can provide technical support and advice. Whether you're not sure what size or pressure class of blind flange you need or you have questions about installation, our experts are here to help. And with our fast delivery times, you won't have to wait long to get your hands on the flanges you need.

Contact Us for Your Blind Flange Needs

If you're in the market for blind flanges, whether it's a standard size or a custom order, I encourage you to get in touch with us. We're always happy to discuss your requirements and provide you with a quote. Don't hesitate to reach out if you have any questions or need more information. Let's work together to find the perfect blind flanges for your project.

References

  • ASME B16.5 - Pipe Flanges and Flanged Fittings
  • API 6A - Specification for Wellhead and Christmas Tree Equipment
  • ASTM Standards for Flange Materials
Zhang Hao
Zhang Hao
I lead our sales team, focusing on delivering exceptional customer service and customized metal parts solutions to clients worldwide.
Send Inquiry